Please note
The test rates listed in this website are only applicable to clients who comply with the requirements in our Testing Notes and Terms and Conditions and pay all submitted invoices within 30 days from the date of invoice
Consolidation
Consolidation
| Description | Price |
| Consolidation in a Hydraulic Cell up to 4 days duration (BS1377-2 : 2022 : 20) |
Up to 100 mm diameter: £ 365.00 150 mm diameter: £ 365 250 mm diameter: £ 450.00 |
| Extra over days in excess of initial 4 days | + £ 38.50 |
| Remoulding specimen at as-received moisture content | Dependent upon specimen size |
Results given
Coefficient(s) of Consolidation and Compressibility
You provide
- Remoulding conditions, if applicable.
- Direction of Flow (inwards, outwards, vertical etc.)
- Loading Condition (free or equal strain)
- Effective consolidation pressure(s)
Typical use(s)
Determining consolidation properties in a particular mode/orientation of drainage, particularly where the in-situ material is in layers of different permeabilities.
Material required
Enough material to fill apparatus with an internal diameter of 76mm, 100mm, 150mm or 250mm and a height of approximately 1/3 to 1/2 the diameter.
Notes
- This test may be performed with a permeability stage after each consolidation stage. The cost is only affected by the additional day charge(s) incurred.
- The duration of this test is material dependent, and can be long, particularly for low-permeability large diameter samples.
- We would recommend that you liaise with us before embarking on this testing to enable us to give you a better indication of the likely duration and total cost.
Rowe Cell
Permeability
Permeability
| Description | Price |
| Permeability in a Hydraulic Cell up to 4 days duration (BS1377-2 : 2022 : 21) |
Up to 100 mm diameter: £ 365.00 150 mm diameter: £ 365 250 mm diameter: £ 420.00 |
| Extra over days in excess of initial 4 days | + £ 38.50 |
| Remoulding specimen at as-received moisture content | Dependent upon specimen size |
Results given
Coefficient(s) of Permeability
You provide
- Remoulding conditions, if applicable.
- Direction of Flow (inwards, outwards, vertical etc.)
- Loading Condition (free or equal strain)
- Effective consolidation pressure(s)
- Differential pressure(s) or hydraulic gradient(s) (optional)
Typical use(s)
Determining permeability in a particular mode/orientation, particularly where the in-situ material is in layers of different permeabilities.
Material required
Enough material to fill apparatus with an internal diameter of 76mm, 100mm,150mm or 250mm, and a height of approximately 1/3 to 1/2 the diameter.
Notes
- The duration of this test is material dependent, and can be long, particularly for low-permeability large diameter samples.
- We would recommend that you liaise with us before embarking on this testing to enable us to give you a better indication of the likely duration and total cost.
- This test does not provide consolidation properties, Mv and Cv. To include those, please specify Consolidation in a Hydraulic Cell, adding permeability stages if required.
Rowe Cell
How to get to Geolabs
